Equivalents for the Bosch spark plug WR8CCX
Bosch WR8CCX is a spark plug : reach 18.5–21.5 mm, heat range medium, electrode nickel, hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm. 17 equivalents listed: interchangeable and compatible spark plugs across all brands — NGK, Bosch, Champion, Denso…
Technical information Bosch WR8CCX spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8CCX — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
17 equivalents compatible with the Bosch WR8CCX spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8CCX spark plug?
The Bosch WR8CCX is interchangeable with: Denso W16ESRU, Torch F5RC-11, Tacti V9110-3025, Denso W16ESR-U, Tacti V9110-3110, Denso 0677002330. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8CCX?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Medium, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.