Equivalents for the Bosch spark plug WR8C
The Bosch WR8C spark plug — hex size 13/16″ (20,8 mm), electrode nickel, thread 14 mm, heat range medium, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 18.5–21.5 mm. All its 10 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR8C spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8C — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
10 equivalents compatible with the Bosch WR8C spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8C spark plug?
The Bosch WR8C is interchangeable with: Torch F5RC, Tacti V91103110, Bosch 0 242 225 523, Beck Arnley 1765112, Kubota 12681-67740, Kubota 12681-67741. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8C?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Medium, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.