Equivalents for the Bosch spark plug WR7DPX6
Bosch WR7DPX6, a spark plug with thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), reach 18.5–21.5 mm, heat range hot, electrode platinum. Browse its 11 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.
Technical information Bosch WR7DPX6 spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR7DPX6 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
11 equivalents compatible with the Bosch WR7DPX6 spark plug
No equivalent for this brand selection.
What can replace a Bosch WR7DPX6 spark plug?
The Bosch WR7DPX6 is interchangeable with: Bosch ZGR5A, Autolite AP64, Motorcraft AGS32C-B4, Motorcraft AGS32C-F4, Motorcraft AGS32C-F6, Bluelightning BLP132. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR7DPX6?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Platinum, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.