Equivalents for the Bosch spark plug WR7DPP30X
Bosch WR7DPP30X is a spark plug with reach 18.5–21.5 mm, thread 14 mm, heat range hot, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), electrode platinum. Find its 23 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Bosch WR7DPP30X spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR7DPP30X — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
23 equivalents compatible with the Bosch WR7DPP30X spark plug
No equivalent for this brand selection.
What can replace a Bosch WR7DPP30X spark plug?
The Bosch WR7DPP30X is interchangeable with: Bosch WR6KI33S, Champion CCH9804, Denso IW16, Bosch WR7KI33S, Bosch WR7DPP30W, Champion OE195T10. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR7DPP30X?
Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Platinum, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.