Equivalents for the Bosch spark plug WR7DP4
Meet the Bosch WR7DP4 spark plug with reach 18.5–21.5 mm, hex size 13/16″ (20,8 mm), heat range hot, electrode platinum, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm. Find its 11 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Bosch WR7DP4 spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR7DP4 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
11 equivalents compatible with the Bosch WR7DP4 spark plug
No equivalent for this brand selection.
What can replace a Bosch WR7DP4 spark plug?
The Bosch WR7DP4 is interchangeable with: Bosch ZGR5A, Autolite AP64, Motorcraft AGS32C-B4, Motorcraft AGS32C-F4, Motorcraft AGS32C-F6, Bluelightning BLP132. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR7DP4?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Platinum, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.