Equivalents for the Bosch spark plug WR7CX
Bosch WR7CX, a spark plug with thread 14 mm, hex size 13/16″ (20,8 mm), heat range medium, electrode nickel, reach 18.5–21.5 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). All its 12 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR7CX spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR7CX — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
12 equivalents compatible with the Bosch WR7CX spark plug
No equivalent for this brand selection.
What can replace a Bosch WR7CX spark plug?
The Bosch WR7CX is interchangeable with: Autolite A404, Motorcraft AGS4CF4, Mopar P-6-3S, Autolite A405, Mopar P-6-4S, Mopar P-6-6S. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR7CX?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Medium, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.