Equivalents for the Bosch spark plug WR6FC
Meet the Bosch WR6FC spark plug : hex size 13/16″ (20,8 mm), electrode nickel, heat range hot, reach 9.5 mm, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). All its 8 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR6FC spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR6FC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
8 equivalents compatible with the Bosch WR6FC spark plug
No equivalent for this brand selection.
What can replace a Bosch WR6FC spark plug?
The Bosch WR6FC is interchangeable with: Champion RJ6C, Newstar G7RC, Bosna FS75CR, Champion RJ6CT04, Champion RJ6C/T04, Champion CCH102. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR6FC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 9.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.