Equivalents for the Bosch spark plug WR6DP0
The Bosch WR6DP0 spark plug with hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 18.5–21.5 mm, electrode platinum, thread 14 mm, heat range hot. All its 124 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR6DP0 spark plug
- Resistor
- yes
- Construction
- Platinum
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR6DP0 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch WR6DP0 spark plug?
The Bosch WR6DP0 is interchangeable with: Bosch WR7CP4, Champion N5G, Denso W20EPG-U, Bosch WR7CPX4, Champion N7BYC, Champion OE012. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR6DP0?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Platinum, Resistor yes, Seat Flat (gasket), Construction Platinum, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.