Equivalents for the Bosch spark plug WR3CS
Bosch WR3CS is a spark plug with thread 14 mm, hex size 13/16″ (20,8 mm), reach 18.5–21.5 mm, heat range cold, electrode nickel, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). All its 163 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR3CS spark plug
- Resistor
- yes
- Construction
- Silver
- Ground electrodes
- 1
- Terminal
- SAE nut 3x caulked
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR3CS — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch WR3CS spark plug?
The Bosch WR3CS is interchangeable with: Bosch M2C, Champion N2, Denso W22ES, Bosch W2C, Bosch W2CC, Bosch W3CS. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR3CS?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Cold, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Silver, Ground electrodes 1, Terminal SAE nut 3x caulked, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.