Equivalents for the Bosch spark plug WR3AP
Bosch WR3AP is a spark plug with thread 14 mm, hex size 13/16″ (20,8 mm), heat range cold, electrode platinum, reach 12.7 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). All its 12 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR3AP spark plug
- Resistor
- yes
- Construction
- Platinum+
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR3AP — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
12 equivalents compatible with the Bosch WR3AP spark plug
No equivalent for this brand selection.
What can replace a Bosch WR3AP spark plug?
The Bosch WR3AP is interchangeable with: Denso IWF27, Brisk N12W, Torch E9RI, Motorcraft AE091, Eyquem F260, Marelli CWP10N. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR3AP?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 12.7 mm, Heat range Cold, Electrode Platinum, Resistor yes, Seat Flat (gasket), Construction Platinum+, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.