Equivalents for the Bosch spark plug WR2CC
Bosch WR2CC, a spark plug — reach 18.5–21.5 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, electrode nickel, heat range very cold, hex size 13/16″ (20,8 mm). Here are its 288 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch WR2CC spark plug
- Resistor
- yes
- Construction
- Super
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR2CC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch WR2CC spark plug?
The Bosch WR2CC is interchangeable with: NGK R7376-10, Bosch W2CS, Champion N1, Bosch W08CS, Bosch WR4CC, Bosch WR07CS. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR2CC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Very cold, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Super, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.