Equivalents for the Bosch spark plug WR12EC
Bosch WR12EC is a spark plug featuring thread 14 mm, hex size 13/16″ (20,8 mm), electrode nickel, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range very hot, reach 19.0–20.5 mm. Here are its 52 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch WR12EC spark plug
- Resistor
- yes
- Construction
- Super
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR12EC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch WR12EC spark plug?
The Bosch WR12EC is interchangeable with: Bosch W35T3, Champion RJ12C, Denso W9LMRUS, Champion RJ19LM, Champion RJ12C/014, Champion RJ12C/053. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR12EC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0–20.5 mm, Heat range Very hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Super, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.