Equivalents for the Bosch spark plug WR11EO
Bosch WR11EO, a spark plug — hex size 13/16″ (20,8 mm), heat range very hot, thread 14 mm, electrode nickel, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 19.0–20.5 mm. Compare its 10 equivalents and find the cheapest compatible plug: NGK, Bosch, Champion, Denso and more.
Technical information Bosch WR11EO spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR11EO — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
10 equivalents compatible with the Bosch WR11EO spark plug
No equivalent for this brand selection.
What can replace a Bosch WR11EO spark plug?
The Bosch WR11EO is interchangeable with: Champion RJ19LM, Torch GL4R, Newstar GL3RC, Champion RJ19LM/069, Champion RJ19LM/R02, Champion RJ19LM/T10. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR11EO?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0–20.5 mm, Heat range Very hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.