Equivalents for the Bosch spark plug WR10DCX
Bosch WR10DCX, a spark plug : thread 14 mm, hex size 13/16″ (20,8 mm), heat range hot, electrode nickel, reach 18.5–21.5 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). Browse its 35 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.
Technical information Bosch WR10DCX spark plug
- Resistor
- yes
- Construction
- Super
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR10DCX — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
35 equivalents compatible with the Bosch WR10DCX spark plug
No equivalent for this brand selection.
What can replace a Bosch WR10DCX spark plug?
The Bosch WR10DCX is interchangeable with: Bosch WR8LP+, Denso W14EXRU11, Torch F4RTI, Denso W14EXR-U11, Denso IW16, Denso VW16. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR10DCX?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Super, Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.