Equivalents for the Bosch spark plug WR10BC
Meet the Bosch WR10BC spark plug with hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 12.7 mm, heat range very hot, electrode nickel, thread 14 mm. Find its 87 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Bosch WR10BC spark plug
- Resistor
- yes
- Construction
- Super
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR10BC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch WR10BC spark plug?
The Bosch WR10BC is interchangeable with: Bosch WR7BC0, Champion L95Y, Denso W14FPU, Bosch WR7BC4, Bosch F002G40541, Champion RL87YC. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR10BC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 12.7 mm, Heat range Very hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Super, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.