Equivalents for the Bosch spark plug WR10AC
The Bosch WR10AC spark plug — thread 14 mm, electrode nickel, hex size 13/16″ (20,8 mm), reach 12.7 mm, heat range very hot, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). Compare its 115 equivalents and find the cheapest compatible plug: NGK, Bosch, Champion, Denso and more.
Technical information Bosch WR10AC spark plug
- Resistor
- yes
- Construction
- Super
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR10AC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch WR10AC spark plug?
The Bosch WR10AC is interchangeable with: Bosch W9AC, Champion L90C, Denso W14FRU, Bosch WR5A, Bosch WR5AC, Bosch WR7ACY. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR10AC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 12.7 mm, Heat range Very hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Super, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.