Equivalents for the Bosch spark plug WR08AC
Bosch WR08AC, a spark plug : reach 12.7 mm, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), electrode nickel, heat range medium. All its 33 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR08AC spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR08AC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
33 equivalents compatible with the Bosch WR08AC spark plug
No equivalent for this brand selection.
What can replace a Bosch WR08AC spark plug?
The Bosch WR08AC is interchangeable with: Champion RL82C, Denso W27FSR, Torch E9RC, Champion RL82C/051, Champion RL82C/110, Champion OE086. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR08AC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 12.7 mm, Heat range Medium, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.