Equivalents for the Bosch spark plug WG250T30
Bosch WG250T30 is an automotive spark plug — tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, electrode nickel, heat range medium. All its 11 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WG250T30 spark plug
- Resistor
- no
- Ground electrodes
- 1
- Terminal
- SAE nut 1x caulked
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WG250T30 — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
11 equivalents compatible with the Bosch WG250T30 spark plug
No equivalent for this brand selection.
What can replace a Bosch WG250T30 spark plug?
The Bosch WG250T30 is interchangeable with: Denso W24E-P11, Torch F8TC, Tacti V91104028, PSA 5962.88, Beck Arnley 1765077, Dacia 7700732626. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WG250T30?
Thread 14 mm, Heat range Medium, Electrode Nickel, Electrode type Surface-gap spark plug, Resistor no, Seat Flat (gasket), Ground electrodes 1, Terminal SAE nut 1x caulked, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.