Spark plug · Bosch

Equivalents for the Bosch spark plug W7C

Bosch W7C is a spark plug with tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, reach 18.5–21.5 mm, electrode nickel, heat range hot, hex size 13/16″ (20,8 mm). Here are its 480 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.

Technical information Bosch W7C spark plug

Ground electrodes
1
Torque
fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

→ How to read a Bosch reference

Buy this spark plug Bosch W7C — best retailers

Buy a spark plug wrench 13/16″ (20,8 mm) wrench

Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.

480 equivalents compatible with the Bosch W7C spark plug

Filter by brand

No equivalent for this brand selection.

What can replace a Bosch W7C spark plug?

The Bosch W7C is interchangeable with: Bosch W8C, Champion N5, Denso W14E, Bosch W9C, Bosch W7C0, Bosch W7CC. These spark plugs share the same mounting (thread, seat) and heat range.

What are the specifications of the Bosch W7C?

Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor no, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.