Equivalents for the Bosch spark plug W10E
The Bosch W10E spark plug — thread 14 mm, reach 19.0–20.5 mm, hex size 13/16″ (20,8 mm), heat range very hot, electrode nickel, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). All its 201 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch W10E spark plug
- Resistor
- no
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch W10E — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch W10E spark plug?
The Bosch W10E is interchangeable with: Bosch W7E, Champion J6, Denso W17-U, Bosch W8E, Bosch W8F, Bosch W9F. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch W10E?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0–20.5 mm, Heat range Very hot, Electrode Nickel, Resistor no, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.