Equivalents for the Bosch spark plug N42
The Bosch N42 spark plug : tightening torque fonte 10–15 N·m · alu 10–12 N·m — ou 180° (½ tour), electrode nickel, thread 10 mm, heat range very cold. Here are its 9 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch N42 spark plug
- Resistor
- no
- Ground electrodes
- 1
- Torque
- fonte 10–15 N·m · alu 10–12 N·m — ou 180° (½ tour)
Buy this spark plug Bosch N42 — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
9 equivalents compatible with the Bosch N42 spark plug
No equivalent for this brand selection.
What can replace a Bosch N42 spark plug?
The Bosch N42 is interchangeable with: Bosch N34, Champion CET4SB, Denso IXEH20TT, Champion EON8287, Beru UPT4, Bosch 79161. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch N42?
Thread 10 mm, Heat range Very cold, Electrode Nickel, Resistor no, Seat Flat (gasket), Ground electrodes 1, Torque fonte 10–15 N·m · alu 10–12 N·m — ou 180° (½ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.