Equivalents for the Bosch spark plug HR7NII332S
Bosch HR7NII332S, a spark plug : reach 25.0 mm, tightening torque fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour), heat range very hot, thread 14 mm, electrode iridium. All its 76 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch HR7NII332S spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Terminal
- SAE nut 3x caulked
- Torque
- fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch HR7NII332S — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
76 equivalents compatible with the Bosch HR7NII332S spark plug
No equivalent for this brand selection.
What can replace a Bosch HR7NII332S spark plug?
The Bosch HR7NII332S is interchangeable with: NGK ILTR7N8, Bosch HR7NI332W, Champion CCH9016, NGK ILTR6G8G, NGK ILTR6H8G, NGK ILTR6A-8G. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch HR7NII332S?
Thread 14 mm, Reach 25.0 mm, Heat range Very hot, Electrode Iridium, Resistor yes, Seat Tapered, Ground electrodes 1, Terminal SAE nut 3x caulked, Torque fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.