Equivalents for the Bosch spark plug HR7NII33
Bosch HR7NII33, a spark plug — tightening torque fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour), reach 25.0 mm, thread 14 mm, electrode iridium, heat range hot. 79 equivalents listed: interchangeable and compatible spark plugs across all brands — NGK, Bosch, Champion, Denso…
Technical information Bosch HR7NII33 spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch HR7NII33 — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
79 equivalents compatible with the Bosch HR7NII33 spark plug
No equivalent for this brand selection.
What can replace a Bosch HR7NII33 spark plug?
The Bosch HR7NII33 is interchangeable with: NGK ILTR6E11, Bosch HR8MII33V, Champion RE10WYPB5, NGK ILTR5A-13G, Bosch HR8MII33X, Bosch HR8NI332W. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch HR7NII33?
Thread 14 mm, Reach 25.0 mm, Heat range Hot, Electrode Iridium, Resistor yes, Seat Tapered, Ground electrodes 1, Torque fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.