Equivalents for the Bosch spark plug HLR8STEX
Bosch HLR8STEX is a spark plug : reach 25.0 mm, electrode nickel, heat range very hot, tightening torque fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm. Here are its 79 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch HLR8STEX spark plug
- Resistor
- yes
- Construction
- Super
- Ground electrodes
- 3
- Terminal
- Special design
- Torque
- fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch HLR8STEX — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
79 equivalents compatible with the Bosch HLR8STEX spark plug
No equivalent for this brand selection.
What can replace a Bosch HLR8STEX spark plug?
The Bosch HLR8STEX is interchangeable with: Bosch HR7MU, Champion RE7PYC5103, Denso ITV16, Bosch HR7NI332(Fomoco), Champion OE029, Champion OE031. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch HLR8STEX?
Thread 14 mm, Reach 25.0 mm, Heat range Very hot, Electrode Nickel, Electrode type Semi-surface air-gap spark plug, Resistor yes, Seat Tapered, Construction Super, Ground electrodes 3, Terminal Special design, Torque fonte 10–20 N·m · alu 10–20 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.