Equivalents for the Bosch spark plug FR8HDC
The Bosch FR8HDC spark plug : heat range hot, electrode nickel, tightening torque cast iron 25–35 N·m · aluminium 25–30 N·m — or 180°–240° (½–⅔ turn), hex size 13/16″ (20,8 mm), reach 18.5–21.5 mm, thread 14 mm. Find its 69 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Bosch FR8HDC spark plug
- Resistor
- yes
- Ground electrodes
- 2
- Torque
- cast iron 25–35 N·m · aluminium 25–30 N·m — or 180°–240° (½–⅔ turn)
Buy this spark plug Bosch FR8HDC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
69 equivalents compatible with the Bosch FR8HDC spark plug
No equivalent for this brand selection.
What can replace a Bosch FR8HDC spark plug?
The Bosch FR8HDC is interchangeable with: NGK BKR5EKC, Bosch FR8HDC36, Champion RC89TMC, Bosch F005X19654, Bosch F005X19782, Champion RC10DMC4. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch FR8HDC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 2, Torque cast iron 25–35 N·m · aluminium 25–30 N·m — or 180°–240° (½–⅔ turn)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.