Equivalents for the Bosch spark plug FR8DPX4
Bosch FR8DPX4 is a spark plug — reach 18.5–21.5 mm, hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range hot, electrode platinum, thread 14 mm. Find its 13 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Bosch FR8DPX4 spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch FR8DPX4 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
13 equivalents compatible with the Bosch FR8DPX4 spark plug
No equivalent for this brand selection.
What can replace a Bosch FR8DPX4 spark plug?
The Bosch FR8DPX4 is interchangeable with: Bosch FGR7KEQE0, Autolite AP3924, Beru 14 FR-7 KPUV, Torch K5RT3P-11, Motorcraft SP-467, Motorcraft SP-468. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch FR8DPX4?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Platinum, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.