Equivalents for the Bosch spark plug F09DER
Bosch F09DER is a spark plug featuring thread 14 mm, electrode nickel, heat range very cold, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), reach 18.5–21.5 mm. Here are its 9 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch F09DER spark plug
- Resistor
- no
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch F09DER — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
9 equivalents compatible with the Bosch F09DER spark plug
No equivalent for this brand selection.
What can replace a Bosch F09DER spark plug?
The Bosch F09DER is interchangeable with: Denso IK0131, HKS DR50, Tacti 267700-1330, Denso IK01-31, Denso 2677001330, Denso 267700-1330. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch F09DER?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Very cold, Electrode Nickel, Resistor no, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.